Quote:
|
1) The profile always appears in the same location. The profile's .tbc file says to start a position 100/100. Is it doing that? If you change the 100/100 to say 500/500, does it still appear in the same place? Do you have this problem with any other profiles?
|
Well I changed the value's in de window screen. Nothing happened. When I changed the value's from 100/100 to 500/500 and I click on one of the monitor buttons then the value's are back on 0 again. Looks like clicking on the buttons are resetting the value's
Quote:
Quote:
# force the "touch" window to open so its top left corner is set at
# the X and Y position defined below
force_window_xpos = 100
force_window_ypos = 100
|
I changed the value's here too. Nothing happened.
Quote:
|
Do you have this problem with any other profiles?
|
Yes, I tried several others. When I load a file the appearing touch-window also starts
always minimized. Even after resizing.
Quote:
|
2) Touchscreen drivers. If You touch your touchscreen, and the mouse moves to where you touched, then the Touchscreen drivers are working fine, and are not an issue, right?
|
Yes and no: when I start touch-buddy with a profile then the (touch) mouse is working fine.
When I start, after starting Touchbuddy, Falcon4AF then the mouse is always 1 inch in the x-direction and 1 inch in the y direction away from my vinger.... It seems Falcon is affecting my second screen. I run Falcon in my 17" mainscreen in native resolution 1280x1024. Of course I did al the calibration of the mouse.
I am using the very common touch driver from
www.touch-base.com. This is a universal driver and 3M is using it for his touchscreens. (They call it a UPDD driver, whatever that is) The mouse is running fine and I do not have any problems with all other applications.
I will try to disable Hypervision because there may be a conflict with your program. Hypervision from ATI is a program to "remember" each window position of any program.
You guys are using special drivers for your small usb touchscreens. I did not install these drivers but maybe this is an issue? Did you test your program on 2 "normal" screens?
Quote:
|
PS: I just tried the Donate link, and it too me to a screen to select an amount, then it took me to PayPal just fine. Maybe give it another try?
|
Well, thats very interesting: I tried to open the link with 2 different webbrowsers (Firefox 2.x and Internet Exploder 7.0) on 3 different machines on 2 locations. No success.
Sorry guys I'm giving you so much trouble. Can I do anything else for you? Tomorrow I will delete the Hypervision program and test Touch-buddy again.