Official TouchBuddy Forum - View Single Post

JohnFranklin · 09-29-2007, 07:13 PM

1. Tb (1.3.18-20070614-full) loaded on Laptop and desktop connected by 5e cable to NIC in each rig. No router for the connection. I only connect to the internet through a wireless router. Both rigs share internet connection. Since I connect peer-to-peer using a 5e cable Windows XP assigns a default 192.168.0.1 and 192.168.0.2. Network communicates...they ping respective IPs. I can share files, print and everthing else that one might do connected by two pcs in local network.

2. TB is extracted on each pc. The cfg file "server stuff" uses the IP I connect to for client 192.168.0.2. "Client stuff" uses the IP for game/server rig 192.168.0.1. New password I created is the same for both rigs.

3. On client pc load profile press "lets go" and the TB GUI loads. On game pc/server press "lets go" UI hangs on "starting sever mode" it fails to launch.
I'm stumped!

John Franklin

09-29-2007, 07:13 PM	#1 (permalink)
JohnFranklin Addict Join Date: Sep 2007 Posts: 5	One last attempt at TB 1. Tb (1.3.18-20070614-full) loaded on Laptop and desktop connected by 5e cable to NIC in each rig. No router for the connection. I only connect to the internet through a wireless router. Both rigs share internet connection. Since I connect peer-to-peer using a 5e cable Windows XP assigns a default 192.168.0.1 and 192.168.0.2. Network communicates...they ping respective IPs. I can share files, print and everthing else that one might do connected by two pcs in local network. 2. TB is extracted on each pc. The cfg file "server stuff" uses the IP I connect to for client 192.168.0.2. "Client stuff" uses the IP for game/server rig 192.168.0.1. New password I created is the same for both rigs. 3. On client pc load profile press "lets go" and the TB GUI loads. On game pc/server press "lets go" UI hangs on "starting sever mode" it fails to launch. I'm stumped! John Franklin