[Mag_maverick]

docdoggy,

I feel your pain. Sometimes I feel like dropkicking this electronic box about 50 yards.

If you haven't got things working yet you might try the following.

Check you touchbuddy.cfg files in both computers.

On your server game computer with XP 64 check the following lines under "Server Stuff"

#The password used for the server
#(checked against the password the connecting clients use)
server_password = **your password**

allowed_ip = match:192.168.1.102

Do not change anything else in this file. Your post said that your client IP is 192.168.1.102.

On your client computer with XP Home check the following lines under "Client Stuff"

connect_ip = 192.168.0.104

#The password used by the client
#(Used when connecting to a server)
client_password = **your password**

Again do not change anything else in this file. Your post said that your server IP is 192.168.0.104

Note: You can use any password. Just be sure you enter the same password in the cfg files of both computers. Enter the password between the double asterisks. Also, you might check to make sure there is not an asterisk in front of the "connect_ip=", the "server_password =", and the "client_password =" lines.

Start "touchbuddy.exe" on your server game computer. Select "Server Mode". Select "Let's Go". TouchBuddy window should show "Starting Server Mode" just below "Let's Go". Start your game.

Start "touchbuddy.exe" on your client computer. Select client mode. Select "Load" with your game profile. Select "Let's Go" and your touchbuddy profile should load on the screen of the client.

Hope this helps.

Mag_maverick