View Single Post
Re: Setting up Lomac Active Modules
Old 03-28-2010, 08:06 PM   #9 (permalink)
CoNa
Junky
 
Join Date: Jun 2006
Location: Kallinge, Sweden
Posts: 77
CoNa is on a distinguished road
Default Re: Setting up Lomac Active Modules

Hi WBK it's been a while ! No local touchbuddy.cfg that can mess it up.
Unfortunately, I don't have any local setup that I could test if it works in that mode, in worst case I might need to change the cables to the monitor and give it a test. If it works local, then I know for sure that first part and the config is OK at least. Then the problem must be on the client side.
Don“t think it's a FW/AV issue as the rest of the profile works ok networked.(EDIT tested with both off and still no joy)
It's just the TEWS and loadout that does not get any data.
Might be the new FC2 setup that has some features that we don't know yet.
Or just me not knowing how to work it...seems like the latter ;-)

I don't know how the server is feading the client with the data.
The problem might be that the client setup is not correct.
I don't know if that setup needs any changes, and if so what to change.

Running Vista 32 on both pcs
__________________

Last edited by CoNa; 03-28-2010 at 09:54 PM.
CoNa is offline   Reply With Quote