F-15 Profile WIP (work in progress) - Page 8

169th_PoleCat · 08-21-2006, 01:33 AM

Absolutely no issues to report yet with black shark. Everything I have tested with it has worked just fine so far.

Out

ruggbutt · 08-23-2006, 12:57 AM

Good news! And here's more good news, at least for me. Check out my pit, which is in the middle of a rebuild. I just had to post a pic.

Dodger · 08-23-2006, 05:06 AM

That looks very nice Rugg. I cant remember off hand, but does Lomac support a HUD only view even if the server has externals off?

ruggbutt · 08-23-2006, 06:26 AM

No it doesn't. A good rule of thumb is that anything active on the server is active on the client machine.

blackpulpit · 08-23-2006, 02:04 PM

Looks great Ruggbutt, if only you could make the BVR for the 120's work as it should we would all be set, look forward to your profile.

ruggbutt · 08-28-2006, 11:58 PM

Here's a shot of my pit with 2 working touchscreens. I'm running two different profiles at once. It don't get better than this!

If you look closely at the 17" touchscreen, you can see how the monitor frame is silver while the overlay frame is black. The overlay is really well built and it's heavier than I thought it would be.

Wild.Bill.Kelso · 08-29-2006, 12:01 AM

Sweet Setup Rugg.

Dodger · 08-29-2006, 12:07 AM

Rugg one question. Is your work area really that clean and organised (check out the cool cabling) or did you clean it up for the photo?

ruggbutt · 08-29-2006, 12:23 AM

I spent a good part of last weekend with my anal-retentive cabling skills. And yeah, usually it's that clean because I hate to have stuff in my way when I'm blowing things up. I had to take apart the middle of the desk to get everything where it should be. I also used my thermal labelmaker to label everything, even both ends of each cable. The good news was that I got everything back together the way it was, and Windows didn't ask to reinstall drivers, so my labeling worked out fine.

To show you how insane I am, I use a squeegee on my glass shower doors every time I get out of the shower. I wipe the sink down with a towel after I use it. We have really hard water here and I hate like hell to fight the water spots.

Urban · 08-29-2006, 02:02 AM

Quote:

Originally Posted by ruggbutt

Here's a shot of my pit with 2 working touchscreens. I'm running two different profiles at once. It don't get better than this!

If you look closely at the 17" touchscreen, you can see how the monitor frame is silver while the overlay frame is black. The overlay is really well built and it's heavier than I thought it would be.

sweet setup, one thing though you need to sort your surround sound speakers out, ie they should be behind you, seen some nice setups where they mounted the surrounds on the back of there chair, maybe that would work well here

08-21-2006, 01:33 AM	#71 (permalink)
169th_PoleCat Junky Join Date: Jun 2006 Posts: 53	Absolutely no issues to report yet with black shark. Everything I have tested with it has worked just fine so far. Out __________________

08-23-2006, 12:57 AM	#72 (permalink)
ruggbutt Dealer Join Date: May 2006 Posts: 703	Good news! And here's more good news, at least for me. Check out my pit, which is in the middle of a rebuild. I just had to post a pic. __________________

08-23-2006, 05:06 AM	#73 (permalink)
Dodger Admin Join Date: May 2006 Posts: 353	That looks very nice Rugg. I cant remember off hand, but does Lomac support a HUD only view even if the server has externals off? __________________ Simulator Realism with Touch-Buddy

08-23-2006, 06:26 AM	#74 (permalink)
ruggbutt Dealer Join Date: May 2006 Posts: 703	No it doesn't. A good rule of thumb is that anything active on the server is active on the client machine. __________________

08-28-2006, 11:58 PM	#76 (permalink)
ruggbutt Dealer Join Date: May 2006 Posts: 703	Here's a shot of my pit with 2 working touchscreens. I'm running two different profiles at once. It don't get better than this! If you look closely at the 17" touchscreen, you can see how the monitor frame is silver while the overlay frame is black. The overlay is really well built and it's heavier than I thought it would be. __________________

08-23-2006, 02:04 PM	#75 (permalink)
blackpulpit Junky Join Date: Jul 2006 Posts: 44	Looks great Ruggbutt, if only you could make the BVR for the 120's work as it should we would all be set, look forward to your profile.

08-29-2006, 12:01 AM	#77 (permalink)
Wild.Bill.Kelso Toolkit Creator Join Date: May 2006 Location: On your Six! Posts: 1,896	Sweet Setup Rugg. __________________ (a.k.a. Snacko) Touchscreen: Innovatek TM-868 8"; Running Local Mode on XP Pro

08-29-2006, 12:07 AM	#78 (permalink)
Dodger Admin Join Date: May 2006 Posts: 353	Rugg one question. Is your work area really that clean and organised (check out the cool cabling) or did you clean it up for the photo? __________________ Simulator Realism with Touch-Buddy

08-29-2006, 12:23 AM	#79 (permalink)
ruggbutt Dealer Join Date: May 2006 Posts: 703	I spent a good part of last weekend with my anal-retentive cabling skills. And yeah, usually it's that clean because I hate to have stuff in my way when I'm blowing things up. I had to take apart the middle of the desk to get everything where it should be. I also used my thermal labelmaker to label everything, even both ends of each cable. The good news was that I got everything back together the way it was, and Windows didn't ask to reinstall drivers, so my labeling worked out fine. To show you how insane I am, I use a squeegee on my glass shower doors every time I get out of the shower. I wipe the sink down with a towel after I use it. We have really hard water here and I hate like hell to fight the water spots. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode