Wild bill A-10 profile question

blackpulpit · 07-21-2006, 01:04 PM

Hey Wild Bill i downloaded your A-10 profile, but, none of the buttons seem to work for me, i must have done something wrong. It wouldnt go into air to ground or change weapon or anything, could you walk me thru the right steps or which one to insert into the profile file, thanks mate. Also should i be using the new stable 1.0.1 touchbuddy instead of the 1.0.0 version i have downloaded, and can i just download it over the other. What are some of the changes made.

Wild.Bill.Kelso · 07-21-2006, 02:14 PM

Yes, use TB 1.0.1 stable. There are some features that I used in the profile that are only available in that version.

But the A/G should have worked. That's just a simple button with macro = 7.

So, try the new version of TB. You should always keep up with the latest version for just this reason.

If that does not work, put LOCK ON in the Default SendTo on the Options tab. It should not be needed, but maybe it will help...

blackpulpit · 07-21-2006, 02:16 PM

Thank you Bill will try, one thing can i just copy over the 1.0.0 .

Wild.Bill.Kelso · 07-21-2006, 02:20 PM

Yes you can.

CoNa · 07-21-2006, 07:10 PM

Hi I have seen the same issue here.
Could it be that it was done for client setup?
I'm still running TB local....
The strange thing is that when I just changed/re-wrote some of the macros, just edited them with the same letters, it worked perfectly again.
Also, some of the commands seem to enable my screen lock somehow...
Just some editing and then I'm set

I will add the UHF/VHF to it also.

Wild.Bill.Kelso · 07-21-2006, 08:21 PM

No, Client/Server or Local, any profile buttons should all work fine.

CoNa · 07-22-2006, 03:10 PM

Found why it was not working for me.
I had downloaded the 1.0.1 version but not installed it, so I was still running on 1.0.0
Oops

After I start using the new version it works like a charm.

07-21-2006, 01:04 PM	#1 (permalink)
blackpulpit Junky Join Date: Jul 2006 Posts: 44	Wild bill A-10 profile question Hey Wild Bill i downloaded your A-10 profile, but, none of the buttons seem to work for me, i must have done something wrong. It wouldnt go into air to ground or change weapon or anything, could you walk me thru the right steps or which one to insert into the profile file, thanks mate. Also should i be using the new stable 1.0.1 touchbuddy instead of the 1.0.0 version i have downloaded, and can i just download it over the other. What are some of the changes made. Last edited by blackpulpit; 07-21-2006 at 01:17 PM.

07-21-2006, 02:14 PM	#2 (permalink)
Wild.Bill.Kelso Toolkit Creator Join Date: May 2006 Location: On your Six! Posts: 1,888	Yes, use TB 1.0.1 stable. There are some features that I used in the profile that are only available in that version. But the A/G should have worked. That's just a simple button with macro = 7. So, try the new version of TB. You should always keep up with the latest version for just this reason. If that does not work, put LOCK ON in the Default SendTo on the Options tab. It should not be needed, but maybe it will help... __________________ (a.k.a. Snacko) Touchscreen: Innovatek TM-868 8"; Running Local Mode on XP Pro

07-21-2006, 02:20 PM	#4 (permalink)
Wild.Bill.Kelso Toolkit Creator Join Date: May 2006 Location: On your Six! Posts: 1,888	Yes you can. __________________ (a.k.a. Snacko) Touchscreen: Innovatek TM-868 8"; Running Local Mode on XP Pro

07-21-2006, 08:21 PM	#6 (permalink)
Wild.Bill.Kelso Toolkit Creator Join Date: May 2006 Location: On your Six! Posts: 1,888	No, Client/Server or Local, any profile buttons should all work fine. __________________ (a.k.a. Snacko) Touchscreen: Innovatek TM-868 8"; Running Local Mode on XP Pro

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-21-2006, 02:16 PM	#3 (permalink)
blackpulpit Junky Join Date: Jul 2006 Posts: 44	Thank you Bill will try, one thing can i just copy over the 1.0.0 .

07-21-2006, 07:10 PM	#5 (permalink)
CoNa Junky Join Date: Jun 2006 Location: Kallinge, Sweden Posts: 63	Hi I have seen the same issue here. Could it be that it was done for client setup? I'm still running TB local.... The strange thing is that when I just changed/re-wrote some of the macros, just edited them with the same letters, it worked perfectly again. Also, some of the commands seem to enable my screen lock somehow... Just some editing and then I'm set I will add the UHF/VHF to it also.

07-22-2006, 03:10 PM	#7 (permalink)
CoNa Junky Join Date: Jun 2006 Location: Kallinge, Sweden Posts: 63	Found why it was not working for me. I had downloaded the 1.0.1 version but not installed it, so I was still running on 1.0.0 Oops After I start using the new version it works like a charm.