Out of touch....

Macka- · 08-28-2008, 03:11 PM

Hi,
I'm attempting to calibrate my touch screen but with no success. I try and perform the 4 points calibration on my touch screen (yes I'm on the right screen) but the screen doesn't recognise that I'm touching it. Where could I be going wrong?

Wild.Bill.Kelso · 08-28-2008, 05:20 PM

You have to touch and 'hold' your finger on the red X for about 3 seconds for it to recognize your touch.

Macka- · 08-28-2008, 11:41 PM

Thanks Wild Bill, sadly no success. I held my finger on the X for the entire period the yellow line tracked across the screen but no result.

Macka- · 08-29-2008, 12:14 AM

An update for clarification....All this has occurred because I've upgraded to a new computer which runs Windows XP Professional x 64 bit. My existing profile does work with the mouse on the new machine but not with finger touch. The Diver I'm using is 5.0.0.5017, as used by Hattrick.

Wild.Bill.Kelso · 08-29-2008, 01:36 PM

I'm not sure why HatTrick pointed you to that website. That is the website for the drivers, but we have always had problems with their drivers, and I pointed HatTrick to some Beta drivers that almost all of us use.

Get them here.

Even though these are beta and also older versions, I have had the best luck with them over any new ones I have tried. I got tired of trying new ones and having problems and have been using these drivers for about 2+ years now.

WBK

Macka- · 08-29-2008, 10:26 PM

[quote=Wild.Bill.Kelso;7776]I'm not sure why HatTrick pointed you to that website. That is the website for the drivers, but we have always had problems with their drivers, and I pointed HatTrick to some Beta drivers that almost all of us use.

[url="http://www.touch-buddy.com/forums/local_links.php?

WBK[/QUOTE]

Perhaps the suggestion was because I'm running XP Professional 64 bit?

HatTrick · 08-30-2008, 01:47 AM

Yes,
The beta drivers do not work with 64bit XP.... The 5.0.0.5017 drivers work perfectly well on my touchscreen with zero issues. I have no idea why calibration would not be working on your screen unless 1) your USB needs to plugged/replugged back in, or 2) you dont have an actual touchscreen.

Macka- · 08-30-2008, 12:44 PM

I think I know the problem. I have inadvertantly installed the old Beta Drivers when I transferred over the entire TouchBuddy folder from my old computer to my new computer's C Drive.

I assume therefore that I need to now delete these original drivers before I install the newer XP 64 bit compatible drivers (vers5.0.0.5017) in to my TB Folder.

So the question now is....How do I identify the old drivers so that I can delete them, before I install the new ones? Sorry for the dumb ass questions.

Wild.Bill.Kelso · 08-30-2008, 01:34 PM

I think you just uninstall the drivers and delete the install folder to be sure. Power down reboot and then start over...

Macka- · 08-30-2008, 02:44 PM

Thanks WB, Understood, but I can't identify the old drivers in order to delete them.

08-28-2008, 03:11 PM	#1 (permalink)
Macka- Addict Join Date: May 2008 Location: Canberra Australia Posts: 12	Out of touch.... Hi, I'm attempting to calibrate my touch screen but with no success. I try and perform the 4 points calibration on my touch screen (yes I'm on the right screen) but the screen doesn't recognise that I'm touching it. Where could I be going wrong?

08-28-2008, 05:20 PM	#2 (permalink)
Wild.Bill.Kelso Toolkit Creator Join Date: May 2006 Location: On your Six! Posts: 1,913	Re: Out of touch.... You have to touch and 'hold' your finger on the red X for about 3 seconds for it to recognize your touch. __________________ (a.k.a. Snacko) Touchscreen: Innovatek TM-868 8"; Running Local Mode on XP Pro

08-28-2008, 11:41 PM	#3 (permalink)
Macka- Addict Join Date: May 2008 Location: Canberra Australia Posts: 12	Re: Out of touch.... Thanks Wild Bill, sadly no success. I held my finger on the X for the entire period the yellow line tracked across the screen but no result.

08-29-2008, 12:14 AM	#4 (permalink)
Macka- Addict Join Date: May 2008 Location: Canberra Australia Posts: 12	Re: Out of touch.... An update for clarification....All this has occurred because I've upgraded to a new computer which runs Windows XP Professional x 64 bit. My existing profile does work with the mouse on the new machine but not with finger touch. The Diver I'm using is 5.0.0.5017, as used by Hattrick. Last edited by Macka-; 08-30-2008 at 11:53 AM. Reason: wrong name used in post

08-29-2008, 01:36 PM	#5 (permalink)
Wild.Bill.Kelso Toolkit Creator Join Date: May 2006 Location: On your Six! Posts: 1,913	Re: Out of touch.... I'm not sure why HatTrick pointed you to that website. That is the website for the drivers, but we have always had problems with their drivers, and I pointed HatTrick to some Beta drivers that almost all of us use. Get them here. Even though these are beta and also older versions, I have had the best luck with them over any new ones I have tried. I got tired of trying new ones and having problems and have been using these drivers for about 2+ years now. WBK __________________ (a.k.a. Snacko) Touchscreen: Innovatek TM-868 8"; Running Local Mode on XP Pro

08-29-2008, 10:26 PM	#6 (permalink)
Macka- Addict Join Date: May 2008 Location: Canberra Australia Posts: 12	Re: Out of touch.... [quote=Wild.Bill.Kelso;7776]I'm not sure why HatTrick pointed you to that website. That is the website for the drivers, but we have always had problems with their drivers, and I pointed HatTrick to some Beta drivers that almost all of us use. [url="http://www.touch-buddy.com/forums/local_links.php? WBK[/QUOTE] Perhaps the suggestion was because I'm running XP Professional 64 bit?

08-30-2008, 01:47 AM	#7 (permalink)
HatTrick F4AF Contributor Join Date: Aug 2008 Location: Knoxville Posts: 8	Re: Out of touch.... Yes, The beta drivers do not work with 64bit XP.... The 5.0.0.5017 drivers work perfectly well on my touchscreen with zero issues. I have no idea why calibration would not be working on your screen unless 1) your USB needs to plugged/replugged back in, or 2) you dont have an actual touchscreen. __________________

08-30-2008, 12:44 PM	#8 (permalink)
Macka- Addict Join Date: May 2008 Location: Canberra Australia Posts: 12	Re: Out of touch.... I think I know the problem. I have inadvertantly installed the old Beta Drivers when I transferred over the entire TouchBuddy folder from my old computer to my new computer's C Drive. I assume therefore that I need to now delete these original drivers before I install the newer XP 64 bit compatible drivers (vers5.0.0.5017) in to my TB Folder. So the question now is....How do I identify the old drivers so that I can delete them, before I install the new ones? Sorry for the dumb ass questions.

08-30-2008, 01:34 PM	#9 (permalink)
Wild.Bill.Kelso Toolkit Creator Join Date: May 2006 Location: On your Six! Posts: 1,913	Re: Out of touch.... I think you just uninstall the drivers and delete the install folder to be sure. Power down reboot and then start over... __________________ (a.k.a. Snacko) Touchscreen: Innovatek TM-868 8"; Running Local Mode on XP Pro

08-30-2008, 02:44 PM	#10 (permalink)
Macka- Addict Join Date: May 2008 Location: Canberra Australia Posts: 12	Re: Out of touch.... Thanks WB, Understood, but I can't identify the old drivers in order to delete them.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode