Error message

Primaryman · 07-31-2006, 12:44 PM

Hi there,

I recieved my Lilliput 8" TS today and I have installed it all with the latest drivers and everything seems to be running fine. I have the TS set up as the secondary monitor in windows.

When I launch TB in Local mode with one of the default profiles I drag the window across to the TS then maximise using the *TB* tab ( I have set the scale setting to 1 in the config, native of TS is 800x600) Then I start Lomac. In the main menu screen everything is working fine and I can push all the buttons however once I start a mission whenever I push a key on the TS the following error message is displayed in the lower status bar:

ERROR: More than one window found to send "macro_name" macro to (1)

I can't for the life of me figure this one out since Lomac and TB are the only programs running, I even tried shutting down my HOTAS software and TIR but that didn't work. Did I do something wrong?

Also I notice on the *TB* the window size line reads:

Location -804, 840. Window size 808 x 608. I tried running it unmaximised and still get same error. Any help would be appriciated. Thanks in advance.

Primaryman

zorlac · 07-31-2006, 12:55 PM

Quick fix: Open the *.tbc file in a text editor, remove all references to "sendto" and "default_sendto", save the file.

These two options will be classed as "obsolete" in the next release (they will still be included, but for games, they are just not needed anymore)

Primaryman · 07-31-2006, 09:09 PM

Thanks Zorlac, that did the trick, running smooth as. Thank goodness for "find and replace". Fantastic prog by the way, I'm gonna have fun getting into this and creating some profiles. There's some much potential.

Unforntunatly can't really play round at the moment, got to go to work.

zorlac · 07-31-2006, 09:54 PM

I do my creative work to allow the potential to escape, and its you guys who come up with the profiles and graphics... TB wouldnt be anything without profiles.... so keep creating and sharing them.

Cant wait to let loose with v1.0.2, but still a lot of work to do on that, including a few "how the hell am I going to do this?" kind of issues

07-31-2006, 12:44 PM	#1 (permalink)
Primaryman Junky Join Date: Jul 2006 Location: Auckland, NZ Posts: 80	Error message Hi there, I recieved my Lilliput 8" TS today and I have installed it all with the latest drivers and everything seems to be running fine. I have the TS set up as the secondary monitor in windows. When I launch TB in Local mode with one of the default profiles I drag the window across to the TS then maximise using the TB tab ( I have set the scale setting to 1 in the config, native of TS is 800x600) Then I start Lomac. In the main menu screen everything is working fine and I can push all the buttons however once I start a mission whenever I push a key on the TS the following error message is displayed in the lower status bar: ERROR: More than one window found to send "macro_name" macro to (1) I can't for the life of me figure this one out since Lomac and TB are the only programs running, I even tried shutting down my HOTAS software and TIR but that didn't work. Did I do something wrong? Also I notice on the TB the window size line reads: Location -804, 840. Window size 808 x 608. I tried running it unmaximised and still get same error. Any help would be appriciated. Thanks in advance. Primaryman Last edited by Primaryman; 07-31-2006 at 12:50 PM.

07-31-2006, 12:55 PM	#2 (permalink)
zorlac Creator Join Date: May 2006 Location: Cambridge, UK Posts: 1,623	Quick fix: Open the *.tbc file in a text editor, remove all references to "sendto" and "default_sendto", save the file. These two options will be classed as "obsolete" in the next release (they will still be included, but for games, they are just not needed anymore) __________________ (Setup: XP Pro, classic mode, LinITX 8" touchscreen (Client/Server), 19" touchscreen (Local), latest development version of TouchBuddy)

07-31-2006, 09:54 PM	#4 (permalink)
zorlac Creator Join Date: May 2006 Location: Cambridge, UK Posts: 1,623	I do my creative work to allow the potential to escape, and its you guys who come up with the profiles and graphics... TB wouldnt be anything without profiles.... so keep creating and sharing them. Cant wait to let loose with v1.0.2, but still a lot of work to do on that, including a few "how the hell am I going to do this?" kind of issues __________________ (Setup: XP Pro, classic mode, LinITX 8" touchscreen (Client/Server), 19" touchscreen (Local), latest development version of TouchBuddy)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-31-2006, 09:09 PM	#3 (permalink)
Primaryman Junky Join Date: Jul 2006 Location: Auckland, NZ Posts: 80	Thanks Zorlac, that did the trick, running smooth as. Thank goodness for "find and replace". Fantastic prog by the way, I'm gonna have fun getting into this and creating some profiles. There's some much potential. Unforntunatly can't really play round at the moment, got to go to work.