TeamSpeak Channel List appears without names

[33rd_Hedgehog]

Hi!

As channel list I see only the following:

• Every channel is there
• when moving (arrows) up and down I see the name of the actual channel
• when switching to a channel I see only the name to the switched channel

That means: I see only one channel name at one time.
Any idea, what's wrong?

1. In TS I do not need to enter any channel password, but in the config file I defined some entries with and some without the given channel password. Is it probably a password problem?

2. Now I tried it without any channel definitions (in tb-config): same behaviour....

[33rd_Hedgehog]

ehmmm, stop for a second: now Zorlac Profile works fine. I have to check the difference.

(Sorry for this post but in the first try zorlacs profile did not work so I decided to build my own...

[33rd_Hedgehog]

Ok, lets see.
The differece begins with the TS screen just after start touchbuddy.

This is zorlacs profile:



And this apears after starting my profile:



As I understand the functionality, I have only one config-file (tb-teamspeak.cfg). How can I get different results?

This are the (uncommented) entries of my profile:

# THIS FILE SHOULD BE RENAMED BEFORE USE TO:
#
# 	tb-teamspeak.cfg
	
[server]
# the name of this server that will appear in TouchBuddy
name = 33rd
# The hostname/IP of this Teamspeak server
# If a port number is required, just add it to the end like 
# the exmaple below
host = tss11.netclusive.de:30021
# The nickname you want to be seen as on this server
nickname = Hedgehog
# The login name on this server
login_name = Hedgehog
# The password for the login name
login_password = *******

and here follows the section with the "other server": everything is commented out:

#[server]
# the name of this server that will appear in TouchBuddy
#name = Some other TS Server
# The hostname or IP address of this Teamspeak server
#host = tss11.netclusive.de:30021
# The nickname you want to be seen as on this server
#nickname = Hedgehog
# The login name on this server
#login_name = Hedgehog
# The password for the login name
#login_password = ts_33rd


#[end-server]

How does zorlac's profile get the "Some other TS Server" information????

But more important: why does his profile work and my simple profile with yust the TS Page not?

Here is my profile's TABS section:

#---------------------------------------------------------
#                          TABS
#---------------------------------------------------------
[new-tab]
	name = Tab
	skinable = 1
	visible = 1
[end-tab]
#

[new-module]
#~~~~~~~~~~~~~~~~~~~~~~~~#
#    TeamSpeak MODULE
#~~~~~~~~~~~~~~~~~~~~~~~~#
	type = teamspeak
	name = TeamSpeak
	text = TS
	font = Arial
	fontsize = 10
	list_fontsize = 18
	visible = 1
[end-module]

[zorlac]

change the foreground color in your window definition to something other than black (black text on a black background doesnt usually work too well )

[33rd_Hedgehog]

ehmmmm, that is, when programmers (like me) think too diffucult.
Thank you.